Applications

RSP suction excavators are used efficiently where a high risk of damage prevents the use of hydraulic excavation technology or the environmental conditions do not allow this. RSP suction excavators ensure the shortest operating times, the fastest damage-free excavation of soil, as well as low traffic and ecological burden. All media can be sucked up - solid particles up to a size of 250 mm. Depending on the installed capacity and depending on the material, suction distances of up to 150 m horizontally and 30 m vertically can be reached. Suction excavators are more than just means of achieving a reduced workload in everyday construction life. They contribute considerably to minimising pipe damage and consequently to insurance damage during excavations in the town centre as well.

Building sector

Excavation work in the area of underground cables and pipes always poses a risk. A suction excavator can be used to carry out excavations in a damage-free way and to work cost-effectively.

Civil engineering

A burst in the water main or other emergencies are not a rarity. The faulty area can be exposed within a few minutes and the repair work can start.

Emergency service

Do you need to dispose of contaminated material, for example? No problem, with a suction excavator, you are on the safe side. Discover the possibilities.

Disposal

Keyhole - the keyhole to domestic connections. The advantages of the keyhole method are obvious. Only minimal excavation is necessary, thus reducing consequential costs due to surface damage.

Trenchless pipeline construction

Sanierung

Instead of troublesome and time-consuming manual labour, the use of the RSP technology in this field has proved its worth on many occasions.

Cleaning of flat roofs

With root renovations, the entire root work needs be exposed gently and at the same time in a time-savingly way. With a suction excavator, you have the fastest and most cost-effective solution to hand.

Tree root renovation

Bulk materials, building materials, spoil and rubble are removed effectively and quickly.

Gebäudesanierung, Kernsanierung, Schuttabsaugung

Building renovation

Precisely in urban areas, replacing whole pipeline sections is expensive. Pipelines can be rehabilitated with the fabric hose procedure. To this end, the deposits are milled out of pipes and suctioned out with the suction excavator.

Pipe refurbishment

Industrie

To be able to work in chemical plants and refineries, the machines used must correspond to the ATEX manufacturer's guideline. RSP suction excavators are equipped for this at the customer's request.

Chemische Anlagen und Raffinerien reinigen

Chemical plants

A suction excavator with hydrocleaner as an accessory are ideally suited for cleaning ports or transshipment areas.

Port facilities

Downtime is costly, it is therefore important to quickly free the tanks of sink layers. Suction excavators impress in this field of application with their efficiency over vacuum vehicles.

Biogas systems

Use in open-cast mining. This is the greatest challenge for a suction excavator. Only powerful and high-quality machines remove the fine dust of access roads and storage places every single day.

Open cast mining

Special use

Various suction tasks arise in steelworks, such as sucking up scrap residues from goods trucks or removing combustion residues from blast furnaces. Discover the possibilities of a suction excavator.

Steelworks

In tunnel building and in mines, suction excavators or suction systems are used for removing mining debris or for cleaning the tunnel floor.

Tunnel building

Suction excavators are suitable for cleaning work on the track bed but also for removing gravel during repair work.

Track laying

Quick help in a disaster situation. Suction excavators are suited for sucking up water, rubble and volcanic ash.

Disasters

For many, the suction excavator is an interesting and primarily safe solution that is used not only in excavations in the town centre but can also be used for renovation and cleaning work. This NoDig technology has already established itself in many countries of Europe as well as in Asia and North America. Modern building contractors have recognized the competitive advantages that the suction technology offers them. There are different models depending on the application area, in which the required suction capacity is achieved with one, two or three fans.

SUMMARISED ONCE AGAIN, HERE ARE THE MOST IMPORTANT AREAS OF APPLICATION OF THIS TECHNOLOGY

Excavated soil in the area of underground supply lines
The rapid emergency service for all media
Tree renovation or gentle root excavation work
Sucking up gravel from flat roofs
Sucking up rubble during building renovations
Care and repair work in the railway sector
Exposing brick wall during house waterproofing
Cleaning of storm drains, catchbasins and settling tank
Suctioning of materials at accidents, emergencies and catastrophes
Suctioning bentonite from horizontal drilling
Factory applications in refineries and chemical plants
Special action cases